DIN rail Vertical






The vertical din guide enclosure are designed to make instruments with the mounting of one or more printed circuit boards vertically from a width of 17.5 mm.
This type of product is mainly used in the industrial field to optimize the space in the electronic panels.
All connectors or PCB terminals can be used, fixed or removable or with 5-pin BUS connector.
We perform custom manufacturing and special colors.
DIN rail Modular






The modular DIN EN 60715 modular guide enclosures are designed for the construction of instruments for the installation of equipment in the civil and industrial sector.
In the 17.5 mm modularity, versions are available in widths from 1 to 9 modules.
The saddle models series TK, K, HD with height mm 53, are integrated in all the panels for civil and home automation instrumentation.
The range has been widened to include the lowered 35 mm versions, BHD and BMX, which are compatible with the lowered panels or those IP65 for outdoor use.
The fixing of the printed circuit boards has been realized without the use of screws, simplifying their assembly and adapting to the use of any type of connector or printed circuit clamp.
Building Automation






The home automation enclosure with wall mounting are suitable for the realization of control instruments for environment and home building automation.
The various sizes available, allow you to create control equipment for home automation housing displays and touch screens up to 5.3 “, which fit all the wall mounting plates of the most used manufacturers on the market.
With the flush-mounting enclosures of the 503 series, it is possible to create adjustment and control instruments to be inserted in the BTICINO Living and Vimar Idea series.
The enclosures of the 502 series are suitable for all flush-mounting wall boxes and are suitable for making dimmers or wireless control systems.
Embedded enclosure
The HD and MX series modular din rail housings are suitable for mounting the Raspberry P3/P4, Beagleboone, Arduino and Odroid cards and for the use of all integrated cards in the series.
Thanks to the screw fixing that have been specially created on the bases, the Embedded cards integrate perfectly with the case, the considerable volume in height that they have allows the housing of additional custom cards.
In both series of din rail housings, custom machining and special colours can be carried out.



